CT Tag for PO-Concept by using her PTU Kit - Alice in Love
and PTU tube "Sexy Alice" by Ellie Milk
non-animated version
animated version
(Used animation 510 from Scrappy Bit Of Fun)
non-animated version
animated version
(Used animation 510 from Scrappy Bit Of Fun)
(Click the images to enlarge)
Preview of the kit
Tutorial - Alice in Love (non-animated version)
✎ Supplies Needed:
✔ Programs: Photoshop - I use CS5, but any version should do.
✔ Tube of Choice: Any tube you like. Here I use PTU Tube "Sexy Alice" by Ellie Milk in PFD.
✔ Mask of Choice: Any mask would do. Here I use FreebieMasks 1 from Swheat Creations.
✔ Font of Choice: Any font you like. Here I use Zamrud & Khatulistiwa
------------------------------------------------------------------------------------
☼ Open a blank image with 680x600 (pixels).
☼ Copy and paste the mask. → Resize it to 34%
☼ Now add blending to the mask layer. → Double click on the mask layer in the layers panel > Click Color Overlay > change color to #cfabfd.
☼ Copy and paste element 130 (the frame) → Resize to 72% → Rotate -5°. → Put it a bit lower than the center of the canvas. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Add a new layer (layer 3) and fill it with color white → Move it under the frame layer → Erase the parts that are outside of the frame.
☼ Copy and paste paper 6 (layer 4) → Resize it to 62% → Right click on the paper layer in the layers panel > Select Create Clipping Mask
☼ Hold ctrl key and select the frame layer, layer 3 and layer 4 in your layers panel. → Go to menu bar > Layer > New > Group from layers, name it Frame Group
☼ Duplicate Frame Group, name it "Frame Group copy". → Move "Frame Group copy" under Frame Group in the layers panel. → Rotate "Frame Group copy" 4°.
☼ Copy and paste element 12 → Flip horizontal→ Move element 12 under "Frame Group copy" in the layers panel, and it'll be upon the mask layer. → Put it on the left side behind the frame groups → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Duplicate element 12 → Flip horizontal→ Put it lower than original element 12 and move it toward left a little bit. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 3 → Resize to 62 % → Place it on the right side next to the frame groups, and move it a bit lower as it is in my tag. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 19 → Flip horizontal → Put it around element 12
☼ Copy and paste element 26 → Resize to 60 % → Rotate 18.5°. → Move toward top and right a bit. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 4 → Move element 4 under the frame layer inside "Frame Group" in the layers panel → Right click on the element 4 layer in the layers panel > Select Create Clipping Mask.→ Resize to 43 % → Put it in the left corner inside the frame.
☼ Copy and paste element 6 → Right click on the element 6 layer in the layers panel > Select Create Clipping Mask. → Flip horizontal → Resize to 17 % → Put it on the left of element 4.
☼ Copy and paste element 9 → Right click on the element 6 layer in the layers panel > Select Create Clipping Mask. → Flip horizontal → Resize to 53 % → Put it in the middle of the frame group and move a bit lower.
☼ Copy and paste element 24 → Move element 24 outside the Frame Group layer in the layers panel, and it'll be on top of all layers. → Put it on the left of element 9 and erase the part that covers element 9 → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste the tube → Flip horizontal → Resize to 31 % → Put it on the left inside the frame → Erase the tube's skirt and legs that are outside of the frame. → Add blending > Drop Shadow > Angle: -141°; Reduce Opacity to 18% >>> Click Bevel and Emboss > style: Emboss > size: 5 px > soften 16 px
☼ Duplicate the frame layer → Move the frame layer copy upon the tube layer in the layers panel, and it'll be on top of all layers. → Erase the part that covers the tube's body and arm
☼ Copy and paste element 54 → Flip horizontal → Resize to 88 % → Put it on the lower part across the Frame Group
☼ Copy and paste element 21 → Resize to 50.5 % → Put it near the lower left corner of the canvas → Add blending > Drop Shadow > Reduce Opacity to 41%
☼ Copy and paste element 88 → Resize to 55 % → Put it on the top edge of the frame next to the tube. Position it as if it lies upon the frame.
☼ Copy and paste element 84 → Flip horizontal → Resize to 19 % → Position element 84 as if it sits upon the flower.
☼ Copy and paste element 19 → Put it on the right side of the canvas and a bit upper.
☼ Add your name/text to it.
☼ Copy and paste element 130 (the frame) → Resize to 72% → Rotate -5°. → Put it a bit lower than the center of the canvas. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Add a new layer (layer 3) and fill it with color white → Move it under the frame layer → Erase the parts that are outside of the frame.
☼ Copy and paste paper 6 (layer 4) → Resize it to 62% → Right click on the paper layer in the layers panel > Select Create Clipping Mask
☼ Hold ctrl key and select the frame layer, layer 3 and layer 4 in your layers panel. → Go to menu bar > Layer > New > Group from layers, name it Frame Group
☼ Duplicate Frame Group, name it "Frame Group copy". → Move "Frame Group copy" under Frame Group in the layers panel. → Rotate "Frame Group copy" 4°.
☼ Copy and paste element 12 → Flip horizontal→ Move element 12 under "Frame Group copy" in the layers panel, and it'll be upon the mask layer. → Put it on the left side behind the frame groups → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Duplicate element 12 → Flip horizontal→ Put it lower than original element 12 and move it toward left a little bit. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 3 → Resize to 62 % → Place it on the right side next to the frame groups, and move it a bit lower as it is in my tag. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 19 → Flip horizontal → Put it around element 12
☼ Copy and paste element 26 → Resize to 60 % → Rotate 18.5°. → Move toward top and right a bit. → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste element 4 → Move element 4 under the frame layer inside "Frame Group" in the layers panel → Right click on the element 4 layer in the layers panel > Select Create Clipping Mask.→ Resize to 43 % → Put it in the left corner inside the frame.
☼ Copy and paste element 6 → Right click on the element 6 layer in the layers panel > Select Create Clipping Mask. → Flip horizontal → Resize to 17 % → Put it on the left of element 4.
☼ Copy and paste element 9 → Right click on the element 6 layer in the layers panel > Select Create Clipping Mask. → Flip horizontal → Resize to 53 % → Put it in the middle of the frame group and move a bit lower.
☼ Copy and paste element 24 → Move element 24 outside the Frame Group layer in the layers panel, and it'll be on top of all layers. → Put it on the left of element 9 and erase the part that covers element 9 → Add blending > Drop Shadow > Angle: -138°; Reduce Opacity to 16%
☼ Copy and paste the tube → Flip horizontal → Resize to 31 % → Put it on the left inside the frame → Erase the tube's skirt and legs that are outside of the frame. → Add blending > Drop Shadow > Angle: -141°; Reduce Opacity to 18% >>> Click Bevel and Emboss > style: Emboss > size: 5 px > soften 16 px
☼ Duplicate the frame layer → Move the frame layer copy upon the tube layer in the layers panel, and it'll be on top of all layers. → Erase the part that covers the tube's body and arm
☼ Copy and paste element 54 → Flip horizontal → Resize to 88 % → Put it on the lower part across the Frame Group
☼ Copy and paste element 21 → Resize to 50.5 % → Put it near the lower left corner of the canvas → Add blending > Drop Shadow > Reduce Opacity to 41%
☼ Copy and paste element 88 → Resize to 55 % → Put it on the top edge of the frame next to the tube. Position it as if it lies upon the frame.
☼ Copy and paste element 84 → Flip horizontal → Resize to 19 % → Position element 84 as if it sits upon the flower.
☼ Copy and paste element 19 → Put it on the right side of the canvas and a bit upper.
☼ Add your name/text to it.
☼ Delete the background layer
☼ Add the required copyright/credit and save it in jpg or png format
------------------------------------------------------------------------------------
Thank you for following the tut. If you have any question regarding the instruction of this tut, please don't hesitate to leave a comment or message me HERE. :) xoxo
No comments:
Post a Comment