CT Tag "I love Christmas" for P-O Concept

CT Tag for P-O Concept by using her PTU Kit - HO-holy night

(You can get it from PFD or S&Co)

and Exclusive Tube at PFD

(Click the images to enlarge)

Preview of the kit

CT Tag "I Believe Santa Claus" for P-O Concept

CT Tag for P-O Concept by using her PTU Kit - HO-holy night

(You can get it from PFD or S&Co)

and PTU Tube "SnowGirl 3" by Alex_Prihodko at PFD

(Click the images to enlarge)

Preview of the kit

CT Tag "White Christmas" for P-O Concept + Tutorial + Freebie Extras

CT Tags for P-O Concept by using her PTU Kit - Frostine

(You can get it from PFD or S&Co)

and PTU Tube "Sybil" by Misticheskaya

(Click the images to enlarge)

Preview of the kit

Here are some extras to snag. Please do not alter the tag in any form, nor crop out the copyright. And please leave some love if you snag the tags. Thank you! :) ♥

Tutorial - White Christmas

✎ Supplies Needed: 

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use "Sybil" by Misticheskaya. It was from SATC but you should be able to get it in PFD later since SATC is closed. 

✔ Scrap Kit: Frostine by P-O Concept. You can get it from PFD or S&Co

✔ Mask of Choice: Any mask would do.Here I use Mask325 from weescotslass creations.

✔ Font of Choice: Any font you like. Here I use Kelt
✔ Wordart of Choice: Any Wordart you like. Here I use Free Wordart from S&Co

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Place the mask. Click File → Place → Select the mask → Resize to make it 600x600 (pixels).

☼ Copy and paste paper 11

☼ Click the mask layer. Select all and copy. Go back to paper 11. Press Q on your keyboard → Paste → Press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon) → Delete the original mask layer.

☼ Copy and paste element 8 → Put it a bit higher than the mask→ Move it below the layer of paper 11

☼ Copy and paste element 15 → Put it in the center of  the canvas

☼ Add a new layer (name it layer4) → Fill it with color #bbdbf7 → Move it below the layer of element 15 → Erase the parts of layer5 which are outside the frame

☼ Copy and paste the tube's close-up → Flip horizontal → In the layer column, right click on it and select Create Clipping Mask → Blending Option: Select Soft Light in the Blend Mode section

☼ Copy and paste element 57 → resize (smaller) → Move it upon the layer of element 15 → Put it in the center of  the canvas

☼ Copy and paste element 4 → Put it a bit left than element 57

☼ Copy and paste element 22 → Put it on the left of the canvas

☼ Copy and paste element 37 → resize (smaller) → Put it on the right of the canvas

☼ Copy and paste the tube → resize the tube to be smaller → Put it on the lower half of the whole canvas

☼ Copy and paste element 5 → resize (smaller) → Put it on the lower left of the canvas to cover the tube's knees

☼ Copy and paste element 40 → Flip horizontal → Put it in front of the tube's chest and arm

☼ Copy and paste element 28 → Put it in front of element 5

☼ Place the Wordart in front of element 5 → Fill in any color you like, here I use #5197ff

☼ Add your name/text to it, put it on the upper right of the canvas. → click Create warped text and then choose Shell Upper

☼ Delete the background layer

☼ Add required copyright/credit and save it in jpg or png format

------------------------------------------------------------------------------------

Thank you for following the tut. :) xoxo

CT Tag "Summer Time Blues" For Jenny's Designz + FTU Cluster Frame + Tutorial

CT Tag for Jenny's Designz by using her PTU Kit - Summer Time Blues.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE or HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com  I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

Tutorial - Summer Time Blues

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use PTU tube "Elodie" by disco_science at PFD

✔ Scrap Kit: PTU Kit "Summer Time Blues" by Jenny's Designz

✔ Mask of Choice: Any mask would do. Here I use Vix_BigMask016 from VixPSP.

✔ Font of Choice: Any font you like. Here I use Southern Aire

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Copy and paste frame2 → Put it in the middle of the canvas

☼ Copy and paste sun →  resize (smaller) → move it below the layer of frame2 → put it on the top right corner of frame 2

☼ Copy and paste net3 →  resize (smaller) → put it on the top inside of the frame→ Erase the part outside of the frame

☼ Copy and paste net2 → put it inside of the frame→ Erase the part outside of the frame

☼ Place the mask. Click File → Place → Select the mask → resize it to 600x600

☼ Add a new layer (name it layer 3) → fill it with foreground color.

☼ Click the mask layer. Select all and copy. Go back to layer 3. Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon) → resize layer 3 (make it a little bit bigger)

☼ Now add blending to layer 3. Click Color Overlay → change color to #adc0eb → Erase the part inside the frame

☼ Add a new layer (name it layer 4) → fill it with foreground color.

☼ Click the mask layer. Select all and copy. Go back to layer 4. Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon)

☼ Now add blending to layer 4. Click Color Overlay → change color to #e87da0 → Erase the part inside the frame

☼ Add a new layer (name it layer 5) → fill it with foreground color.

☼ Click the mask layer. Select all and copy. Go back to layer 5. Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon)

☼ Copy and paste paper 3 → resize it (make its height same as frame 2 → Right click on the paper 3 layer on the layer column and select Create Clipping Mask → Erase the part of paper 3 outside the frame

☼ Copy and paste sand →  resize (smaller) → put it right below frame 2

☼ Copy and paste forgot me nots 3 → resize (smaller) → Duplicate forgot me nots 3 twice → put them in a row on the lower part inside of the frame

☼ Copy and paste bird → resize (smaller) → move it upon the layer of frame2 → put it on the lower left corner of the frame

☼ Copy and paste flower1 → resize (smaller) → put it in the middle on the right side of the frame's edge

☼ Copy and paste flower3 → resize (smaller) → put it on the top left corner of frame 2

☼ Copy and paste bird2 → resize (smaller) → put it on the top right corner of frame 2

☼ Copy and paste drink2 → resize (smaller) → put it on the lower right corner inside of frame 2

☼ Copy and paste drink3 → resize (smaller) → put it next to drink2

☼ Copy and paste drink1 → resize (smaller) → put it on the lower right of the canvas

☼ Copy and paste coconut → resize (smaller) → put it on the left next to drink2

☼ Copy and paste seashell → resize (smaller) → put it on the left and a bit far from coconut

☼ Copy and paste Shell → resize (smaller) → put it on the left next to coconut

☼ Copy and paste seashell2 → resize (smaller) → put it on the left next to Shell

☼ Copy and paste star fish → resize (smaller) → put it on the left side below the frame and the bird

☼ Copy and paste the tube → resize (smaller) → Flip horizontal → put it in the middle of the canvas → Adjust erase's opacity to 5% and erase the bottom of the tube's legs a bit

☼ Delete the background layer

☼ Add your name/text to it, put it on the lower left of the canvas → Apply styles you like

☼ Add required copyright/credit and save it in png format

------------------------------------------------------------------------------------

Thank you for following the tut. :) xoxo

CT Tag "Natures Song" For Jenny's Designz + FTU Cluster Frame/Mini Tutorial

CT Tag set (FB Timeline) for Jenny's Designz by using her PTU Kit - Natures Song.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com  I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

Tutorial - Natures Song

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use Elena Dudina's FTU tube.

✔ Scrap Kit: PTU Kit "Natures Song" by Jenny's Designz

✔ Mask of Choice: Any mask would do. Here I use Mask 10 from Chas Designs.

✔ Font of Choice: Any font you like. Here I use Flower in the Window

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Copy and paste paper 7 → resize it to 600x600

☼ Place the mask. Click File → Place → Select the mask → move it below the layer of paper 7

☼ Click the mask layer. Select all and copy. Go back to paper 7 → Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the bottom of the layer column (it's next to fx icon) → Delete the original mask layer. → Adjust Hue of paper 7 to +180

☼ Copy and paste frame 6 → Resize to make it a little bit smaller.

☼ Copy and paste the tube → duplicate frame 6 → move frame 6 copy upon the tube layer → resize the tube to be smaller → erase the parts of the tube that are outside of the frame → erase the top part of frame 6 copy which covers the tube's head

☼ Copy and paste mushrooms2 →  resize (smaller) → put it on the lower right of frame 6

☼ Duplicate mushrooms2 (so we will have mushrooms2 copy) → Flip horizontal  →  resize (smaller) → put it on the left next to the original mushrooms2

☼ Copy and paste flower spray →  resize (smaller) → Rotate 43.5° → put it on the upper right of frame 6

☼ Duplicate flower spray (so we will have flower spray copy) → Flip horizontal → put it on the upper left of frame 6

☼ Delete the background layer

☼ Add your name/text to it, put it in between the 2 mushrooms → Apply styles you like

☼ Add required copyright/credit and save it in png format

------------------------------------------------------------------------------------

Thank you for following the tut. :) xoxo

CT Tag "Freedom" for P-O Concept + Tutorial

CT Tags for P-O Concept by using her PTU Kit - Freedom

and exclusive fan gift FTU tube "Joy" by P-O Concept at P-O Concept Fan Page

(Click the images to enlarge)

Preview of the kit

Tutorial - Freedom

✎ Supplies Needed: 

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use exclusive fan gift FTU tube "Joy" by P-O Concept at P-O Concept Fan Page.

✔ Scrap Kit: Freedom by P-O Concept from SATC

✔ Font of Choice: Any font you like. Here I use Black boys on mopeds

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Copy and paste element 4 → resize (smaller) → put it on the center of the canvas

☼ Copy and paste element 146. → resize (smaller) → put it on the upper left of the canvas

☼ Copy and paste element 120 → put it on the upper left of the canvas

☼ Copy and paste element 105 → resize (smaller) →  Rotate -34° → put it on the lower right of the canvas

☼ Copy and paste element 64 (the frame) → resize (smaller) → put it on the center of the canvas

☼ Copy and paste element 29 → resize (smaller) → put it on the upper right near the frame

☼ Copy and paste element 139 → resize (smaller) → put it on the upper right near element 29 → Adjust erase's opacity to 7% and erase the lower left part of element 139 a bit

☼ Copy and paste element 1 → resize (smaller) → put it on the upper left near the frame

☼ Copy and paste the tube → resize the tube to be smaller → put it on the center of the canvas

☼ Duplicate element 64 (it should be named layer 5 copy) → Move it upon the tube layer → Erase the parts of layer 5 copy that cover the tube's head and element 29→ Erase the parts of the tube which are outside of the frame

☼ Copy and paste element 133 → resize (smaller) → Move it upon the layer of layer 5 copy → put it on the left of element 105

☼ Copy and paste element 106 → resize (smaller) → put it between element 133 and element 105

☼ Copy and paste element 12 → resize (smaller) → put it on the left near the frame

☼ Copy and paste element 7 → resize (smaller) → put it on the lower left near the frame

☼ Copy and paste element 102 → resize (smaller) → put it on the right of element 7

☼ Copy and paste element 116 → resize (smaller) → Rotate 40° → put it upon element 139 → Apply it with the style you like

☼ Copy and paste element 108 → resize (smaller) → Flip horizontal  → put it near element 116

☼ Add your name/text to it, put it on the mid-lower of the canvas

☼ Add required copyright/credit and save it in png format

------------------------------------------------------------------------------------

Thank you for following the tut. :) xoxo

Guest CT Tag "Beach Fun" for P-O Concept + Tutorial

CT Tags for P-O Concept by using her PTU Kit - Oh So Hot

and PTU tube "Elodie" by disco_science

(Click the images to enlarge)

Preview of the kit

Tutorial - Beach Fun

✎ Supplies Needed: 

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use "Elodie" by disco_science from PFD.

✔ Scrap Kit: Oh So Hot by P-O Concept from SATC

✔ Mask of Choice: Any mask would do. Here I use Mask 64 from Rosesblack Creative.

✔ Font of Choice: Any font you like. Here I use Beach Type

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Copy and paste element 107 → resize (smaller) → put it on the left lower part of the canvas

☼ Duplicate element 107→ move it toward the right of the canvas a bit

☼ Place the mask. Click File → Place → Select the mask → move it below the layer of element 107

☼ Add a new layer (name it layer1) → fill it with foreground color. 

☼ Click the mask layer. Select all and copy. Go back to layer1. Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon) → resize layer 1 (make it a little bit bigger) → Delete the original mask layer.

☼ Now add blending to layer 1. Click Color Overlay → change color as blue

☼ Copy and paste element 15. → Flip horizontal → move it upper and toward the right of the canvas a bit → move it below layer1

☼ Copy and paste element 114 → move it below the layer of element 15 →  resize (smaller)→ put it on the right of element 15 → change opacity to 64%

☼ Copy and paste element 117 → move it upon the layer of element 107 →  put it on the left side of element 107

☼ Copy and paste the tube → resize the tube to be smaller → move the tube to the right side of element 107

☼ Copy and paste element 23 → move it below the tube layer → resize (smaller) → put it on the upper right of the canvas 

☼ Copy and paste element 18 → resize (smaller) → move it toward the right of the tube a bit 

☼ Copy and paste element 19 → resize (smaller) → move it toward the left of the tube a bit 

☼ Copy and paste element 65 → resize (smaller) → put it next to element 117

☼ Copy and paste element 39 → resize (smaller) → put it on the left of the tube

☼ Copy and paste element 93 → resize (smaller) → put it below element 39

 ☼ Copy and paste element 2 → resize (smaller) → put it on the right element 93

☼ Copy and paste element 98 → resize (smaller) → Flip horizontal → move it upon the tube layer → put it around the lag of the tube

☼ Copy and paste element 97 → resize (smaller) → put it around the lag of the tube

☼ Copy and paste element 64 → resize (smaller) → put it around the lag of the tube

☼ Copy and paste element 59 → resize (smaller) → put it around the lag of the tube

☼ Copy and paste element 83 → resize (smaller) → put it around the lag of the tube

☼ Copy and paste element 77 → resize (smaller) → put it around the lag of the tube

☼ Copy and paste element 88 → resize (smaller) → put it on the left of element 98

☼ Copy and paste element 99 → resize (smaller) → put it below element 88

☼ Copy and paste element 100 → put it below element 99

☼ Copy and paste element 12 → resize (smaller) → put it on the right of the tube

☼ Copy and paste element 90 → resize (smaller) → put it on the left of element 12

☼ Copy and paste element 91 → resize (smaller) → put it on the left of element 90

☼ Copy and paste element 40 → resize (smaller) → Flip horizontal → put it below element 117

☼ Copy and paste element 78 → resize (smaller) → put it on the left of element 88

☼ Copy and paste element 49 → resize (smaller) → put it upon element 78 → move it upon the layer of element 117

☼ Copy and paste element 49 (#1) → resize (a bit smaller) → Rotate 37° → put it on the left of element 107

☼ Copy and paste element 49 → put it on the right of element 49 (#1)

☼ Copy and paste element 19 → resize (a bit smaller)→ move it below the layer of element 23

☼ Copy and paste element 55 → put it on the left of the canvas

☼ Duplicate element 55 → Flip horizontal → Flip vertical → Rotate -78° → put it on the left upper corner of  the canvas

☼ Delete the background layer

☼ Add your name/text to it, put it on the lower left of the canvas. → click Create warped text and then choose Shell Upper

☼ Add required copyright/credit and save it in jpg or png format

------------------------------------------------------------------------------------

Thank you for following the tut. :) xoxo

CT Tag "Night Monster" For Jenny's Designz + FTU Cluster Frame

CT Tag set (FB Timeline) for Jenny's Designz by using her PTU Kit - City Nights.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

Guest CT Tutorial "Castle Beauty" for P-O Concept

Castle Beauty

(Click the image to enlarge)

✎ Supplies Needed: 

✔ Programs: Photoshop - I use CS5, but any version should do.

✔ Tube of Choice: Any tube you like. Here I use "Charlotte" by Ellie Milk from PFD.

✔ Scrap Kit: Castle in the Air by P-O Concept from SATC

✔ Mask of Choice: Any mask would do. Here I use Mask 50 from Moonbeams and Spiderwebs

✔ Font of Choice: Any font you like. Here I use Owah Tagu Siam NF

------------------------------------------------------------------------------------

☼ Open a blank image with 600x600 (pixels).

☼ Place the mask. Click File → Place → Select the mask

☼ Add a new layer (name it layer1) → fill it with foreground color. 

☼ Click the mask layer. Select all and copy. Go back to layer1. Press Q on your keyboard → paste → press Q again → Click "Add Vector Mask" icon in the below of the layer column (it's next to fx icon) → resize layer 1 (make it a little bit bigger) → Delete the original mask layer.

☼ Now add blending to layer 1. Click Color Overlay → change color as purple

☼ Copy and paste element 44 (the frame). Resize to make it a little bit smaller.

☼ Copy and paste paper 11 → move it below the layer of element 44 → Erases the parts of the paper which are outside of the frame and in the middle of the frame 

☼ Select both paper layer and the frame layer and merge them (it'll be renamed as layer 2)

☼ Copy and paste the tube → duplicate layer 2 → move layer 2 copy upon the tube layer → resize the tube to be smaller → move the tube to the right side of the frame a bit→ erase the top part of layer 2 copy which covers the tube's head, shoulder and arm. 

☼ Place paper 3 → move it below layer 2 → resize to make it smaller → adjust its hue and saturation (set hue as -180)

☼ Copy and paste the tube (close up) → put it between paper 3 and layer 2 → resize (smaller) → change opacity to 59% → erase the part that is outside of the frame

☼ Copy and paste element 58 → move it below paper 3 → resize (smaller) → put it on the lower right corner of the canvas 

☼ Copy and paste element 3 → move it below paper 3→ resize (smaller) → put it on the top right corner of the canvas 

☼ Copy and paste element 6 → move it upon layer 2 copy → resize (smaller) → put it on the left of the frame

☼ Copy and paste element 15 → resize (smaller) → put it on the breast of the tube

☼ Duplicate element 15 → resize (smaller) → put it on the bottom of the castle

☼ Copy and paste element 8 → resize (smaller) → put it on the lower right of the frame

☼ Copy and paste element 99 → resize (smaller) → put it on the lower right of the canvas

☼ Copy and paste element 24 → Rotate 90° CCW→ put it on the top left of the canvas 

☼ Copy and paste element 72 → resize (smaller) → put it on the top right of the frame

☼ Copy and paste element 15 → put it on the lower part of the frame

☼ Copy and paste element 24 → put it on the lower right of the canvas

☼ Copy and paste element 95 → resize (smaller) → put it on the lower left of the canvas

☼ Copy and paste element 36 → resize (smaller) → put it on the top left of the canvas

☼ Delete the background layer

☼ Add your name/text to it, put it on the lower right of the frame. 

☼ To add P-O which is on the top left of the canvas, you can do it by clicking Create warped text and then choose Arc

☼ Eventually add required copyright/credit and save it in jpg or png format

------------------------------------------------------------------------------------

Thank you for following the tut. This is my first tutorial. Hope it is understandable. :) xoxo

Click HERE to view & download the Cluster Frame Freebie made by me

Guest CT Tag "Castle Beauty" for P-O Concept + Freebie + Tut

CT Tags for P-O Concept by using her PTU Kit - Castle in the Air

and PTU tube "Charlotte" by Ellie Milk

(Click the images to enlarge)

Preview of the kit

You can get it HERE.

Or visit P-O Concept's blog HERE.

<<< Click HERE to view the Tutorial >>>

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

CT Tag "Cat Meow" For Jenny's Designz + FTU Cluster Frame

CT Tag for Jenny's Designz by using her PTU Kit - Cat Meow.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

CT Tag "Second Chances" For Jenny's Designz + FTU Cluster Frame

CT Tag set (FB timeline set) for Jenny's Designz by using her PTU Kit - Second Chances.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

Guest CT Tag "Sweet Party" for P-O Concept

CT Tags for P-O Concept by using her PTU Kit - Let's Have Cake

and PTU tube "Carolyna" by Pandora Creations

(Click the images to enlarge)

Preview of the kit

You can get it HERE.

Or visit P-O Concept's blog HERE.

CT Tag "Sweet Country" For Jenny's Designz + FTU Cluster Frame

CT Tag set (FB timeline set) for Jenny's Designz by using her PTU Kit - Sweet Country.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

CT Tag "Spring Princess" For Jenny's Designz + Freebies

CT Tag for Jenny's Designz by using her PTU Kit - Spring Princess.

(Click the images to enlarge)

Preview of the kit

You can get it HERE or HERE.

Or visit Jenny's blog HERE.

Here is a cluster frame freebie I made with the Kit. Feel free to download HERE. :) 

Please do not claim it as your own but link back, nor share it with others but give them the link to my blog. If you use it in your work, please send it to numeeytu.cs@gmail.com I'd love to see your work with this and post it on my blog. :) And please leave some love if you download the cluster frame. xoxo Thank you :)

Below are some extras. Feel free to snag :)